DanteTM Enabled IP Speakers Now in Stock

DanteTM-enabled digital audio systems can now extend all the way to the end point in an installation. SoundTube’s IPD Speaker Series brings the convenience of Dante control and management to in-ceiling and surface-mount speakers. With a single category cable, you can run audio and up to 40 watts per channel PoE to a speaker. Every digital low latency speaker in a SoundTube IPD system is individually addressable and self-monitoring. And, because these speakers are set up and managed via software, zoning is easy and there’s no need to re-wire anything if system requirements change.

We offer four in-ceiling IPD models and one surface-mount model. In addition, our IPD4 speakers give you an economical way to expand audio coverage in a Dante system. With an IPD4 speaker, up to three additional non-Dante SoundTube speakers may be added, and powered, to run off of a single Dante-enabled speaker. See below for more information.

+ View Series Accessories
+ View Series Sales Brochure
+ STNet Owner’s Manual
+ Control Center Manual

Firmware files
+ dna_mcu_1.10

Documents
Dante speaker Firmware Update Instructions
+ Audinate Firmware Update Instructions

Software
+ SoundTube DNA Controller
+ Atterotech MCU firmwareupdate


STNet-Switch     |     IPD-CM52-BGM     |     IPD-CM52s-BGM     |     IPD-CM62-BGM     |     IPD-CM82-BGM     |     IPD-SM500i-II     |     IPD4-CM52-BGM     |     IPD4-CM62-BGM

STNet-Switch

Rack mountable 16-port 40w PoE switch. In addition to the 16 Ethernet ports, the STNet-Switch includes two gigabit ports to connect control DSPs and Dante® and CobraNet® enabled input devices and is also used for linking additional switches. Also, a WAN port (CobraNet only) is provided for integration with an outside network. UL 60950 approved. For CobraNet® version speakers, click here.

Large Product Image

Number of 40w PoE Ethernet Ports 16, 100 Mbps
Number of Expansion Ports 2 1Gb ports
External Communication WAN port, 100 Mbps (CobraNet only)
Power 110-240 VAC, 50/60 Hz
Relay I/O Audible alarm, visible alarm, reset (CobraNet only)
FW update Connection USB
Height 44.5 mm (1.75 in)
Width 431.8 mm (17 in)
Depth 247.7 mm (9.75 in)
Weight 3.1 kg (6.75 lbs.)
Go To Top

IPD-CM52-BGM

5.25″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER

Dante®-addressable coaxial in-ceiling speaker incorporating one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Included accessories: Color-coded (orange) tile bridge, UL listed conduit clamp and paint shield.

Large Product Image | Tech SheetInstallation Guide | GLL

Frequency Response (-10 dB) 65 Hz – 22 kHz
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 99.0 dB
Tweeter 0.75 in. Silk
Connections RJ45 ethernet connector
Visible Height 8.6 mm (0.34 in)
Visible Diameter 298.5 mm (11.75 in)
Backcan Height 146.1 mm (5.75 in.)
Backcan Diameter 245.6 mm (9.67 in)
Weight 3.6 kg (8.0 lbs.)
Shipping Weight 4.1 kg (9.0 lbs.)
Certifications UL 2043; UL 60065
Optional Accessory Color-coded (orange) pre-construction
bracket (AC-CM6/8-PCB)
Colors White / Custom
Go To Top

IPD-CM52s-BGM

5.25″ COAXIAL IN-CEILING BACKGROUND MUSIC SHALLOW BACKCAN SPEAKER

Dante®-addressable coaxial in-ceiling speaker engineered for installation in locations with small plenum space. A 3.5 inch-deep backcan incorporates one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 1.6 in (40.6 mm). UL 60065 and 2043 listed. Included accessories: Color-coded (orange) tile bridge, UL listed conduit clamp and paint shield.

Large Product Image | Tech Sheet | Installation Guide | GLL

Frequency Response (-10 dB) 65 Hz – 22 kHz
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 99.0 dB
Tweeter 0.75 in. Silk
Connections RJ45 ethernet connector
Visible Height 8.4 mm (0.33 in.)
Visible Diameter 298.5 mm (11.75 in)
Backcan Height 95.3 mm (3.75 in.)
Backcan Diameter 245.6 mm (9.67 in)
Weight 3.6 kg (8.0 lbs.)
Shipping Weight 4.1 kg (9.0 lbs.)
Certifications UL 2043; UL 60065
Optional Accessory Color-coded (orange) pre-construction
bracket (AC-CM6/8-PCB)
Colors White / Custom
Go To Top

IPD-CM62-BGM

6.5″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER

Dante®-addressable coaxial in-ceiling speaker incorporating one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to2.38 in (60.4mm). UL 60065 and 2043 listed. Included accessories: Color-coded (green) tile bridge, UL listed conduit clamp and paint shield.

Large Product Image | Tech SheetInstallation Guide | GLL

Frequency Response (-10 dB) 60 Hz – 22 kHz
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 101.0 dB
Tweeter 1.0 in. Silk
Connections RJ45 ethernet connector
Visible Height 8.6 mm (0.34 in.)
Visible Diameter 298.5 mm (11.75 in)
Backcan Height 146.1 mm (5.75 in.)
Backcan Diameter 245.6 mm (9.67 in)
Weight 3.6 kg (8.0 lbs.)
Shipping Weight 4.1 kg (9.0 lbs.)
Certifications UL 2043; UL 60065
Optional Accessory Color-coded (green) pre-construction
bracket (AC-CM6-8EZ-PCB)
Colors White / Custom
Go To Top

IPD-CM82-BGM

8.0″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER

Dante®-addressable coaxial in-ceiling speaker incorporating one 8.0 inch (203 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 55 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4 mm). UL 60065 and 2043 listed. Included accessories: Color-coded (green) tile bridge, UL listed conduit clamp and paint shield.

Large Product Image | Tech SheetInstallation Guide | GLL

Frequency Response (-10 dB) 55 Hz – 22 kHz
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 103.0 dB
Tweeter 1.0 in. Silk
Connections RJ45 ethernet connector
Visible Height 8.6 mm (0.34 in)
Visible Diameter 298.5 mm (11.75 in)
Backcan Height 203.2 mm (8.0 in.)
Backcan Diameter 245.6 mm (9.67 in)
Weight 4.1 kg (9.0 lbs.)
Shipping Weight 4.5 kg (10.0 lbs.)
Certifications UL 2043; UL 60065
Optional Accessory Color-coded (green) pre-construction
bracket (AC-CM6-8EZ-PCB)
Colors White / Custom
Go To Top

IPD-SM500i-II

5.25” COAXIAL SURFACE MOUNT SPEAKER

Dante®-addressable surface-mount speaker incorporating one 5.25-inch polypropylene woofer (134 mm) and one 1.0-inch (25.4 mm) convex titanium tweeter with BroadBeam® waveguide in an injection-molded, glass fiber reinforced ABS enclosure. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware for the IPD-SM500i-II is included and features SoundTube’s proprietary Stealth™ bracket mounting system, providing unlimited directional aiming and a low profile, with a security knob to reduce tampering after placement. The system includes a detachable mounting plate designed for premounting in either wall or pole applications.

Large Product Image | Tech SheetInstallation Guide

Frequency Response (-3 dB) 86 Hz – 22 kHz
Frequency Response (-10 dB) 60 Hz – 22 kHz
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 98.0 dB
Tweeter 1 in / 25 mm Convex Aluminum
w/ BroadBeam® Waveguide
Woofer 5.25 in / 130 mm Poly
Connections RJ45 ethernet connector
Height 289.56 mm (11.40 in)
Width 212.26 mm (8.36 in)
Depth 266.30 mm (10.48 in)
Weight 4.3 kg (9.5 lbs)
Shipping Weight 5.0 kg (11 lbs)
Optional Accessory
Colors Black / White / Custom
Go To Top

IPD4-CM52-BGM

5.25″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM

Offering an economical option for expansion of audio coverage in a digital speaker system, this DanteTM-addressable coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM52-BGM speakers. The speaker incorporates one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter.  BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Included accessories: Color-coded (orange) tile bridge, UL listed conduit clamp and paint shield.

Large Product Image | Tech Sheet | Installation Guide | GLL

Frequency Response (-3 dB) 90 Hz – 20 kHz
Frequency Response (-10 dB) 65 Hz – 22 kHz
Sensitivity 89 dB
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 93.0 dB
Tweeter 0.75 in. Silk
Connections RJ45 ethernet connector
Visible Height 8.6 mm (0.34 in)
Visible Diameter 298.5 mm (11.75 in)
Backcan Height 146.1 mm (5.75 in.)
Backcan Diameter 245.6 mm (9.67 in)
Weight 3.6 kg (8.0 lbs.)
Shipping Weight 4.1 kg (9.0 lbs.)
Certifications UL 60950 on STNet-Switch & Power Supply; UL 60065 on speakers; CE & CB on all
Optional Accessory Color-coded (orange) pre-construction
bracket (AC-CM6/8-PCB)
Colors White / Custom
Go To Top

IPD4-CM62-BGM

6.5″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM

Offering an economical option for expansion of audio coverage in a digital speaker system, this DanteTM-addressable coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter.  BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio.  Mounting hardware is included and features SoundTube’s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Included accessories: Color-coded (green) tile bridge, UL listed conduit clamp and paint shield.

Large Product Image | Tech Sheet | Installation Guide | GLL

Frequency Response (-3 dB) 80 Hz – 20 kHz
Frequency Response (-10 dB) 60 Hz – 22 kHz
Total Bi-Amp Power 40 W
Max SPL dB @ 1 M 93.0 dB
Tweeter 1.0 in. Silk
Connections RJ45 ethernet connector
Visible Height 8.6 mm (0.34 in.)
Visible Diameter 298.5 mm (11.75 in)
Backcan Height 146.1 mm (5.75 in.)
Backcan Diameter 245.6 mm (9.67 in)
Weight 3.6 kg (8.0 lbs.)
Shipping Weight 4.1 kg (9.0 lbs.)
Certifications UL 60950 on STNet-Switch & Power Supply; UL 60065 on speakers; CE & CB on all
Optional Accessory Color-coded (green) pre-construction
bracket (AC-CM6-8EZ-PCB)
Colors White / Custom
Go To Top