Designed to work with all SoundTube Speakers (as well as other brands), the WLL-TR-1p system enables the placement of speakers in locations where running wires may be difficult or impossible. Utilizing uncompressed streaming digital audio over 2.4 GHz and requiring only AC power for operation, the SoundTube wireless system provides two 50 W channels of audio. The WLL-TR-1p is sold as a system and contains one WLL-TX1 transmitter and one WLL-RX1p receiver. Individual receiver units may be purchased.

+ View Series Accessories


WLL-TX1-II     |     WLL-RX1p-II

 

WLL-TR-1p-II

Go To Top

WLL-TX1-II

Complete uncompressed wireless transmitter and receiver system

The WLL-TX1 wireless transmitter unit transmits uncompressed stereo audio wirelessly for maximum fidelity. An additional 9 receivers (for a total of 10) may be ordered to accompany the included single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 30 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Audio input options for the transmitter unit include USB, stereo mini or 1/4″ balanced input connections at the transmitter. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. A High/Low power selector switch on transmitter limits RF range where needed.

Large Product Image

RF Bands 2.4 GHz, 5.2 GHz & 5.8 GHz
Operating Range (full power) 150 ft indoors / 210 ft line of sight
Operating Range (low power) 50 ft indoors / 70 ft line of sight
Audio Frequency Response 20 Hz – 20 kHz
Amplifier Output Power 50w/ch @ 8 ohms 65w/ch@ 4ohms
Modulation Digital
Dynamic Range 90dB
Power Supply/Requirements 32V, 3.75A
Height 1.75 in
Width 6.1875 in
Depth 6.5 in
Weight 1.85 lbs
Housing Material Powder coated metal
ROHS Approved
Regulatory – CE CE UL FCC CCC ec
Optional Accessory AC-WLL-RMA rack mount adaptor
Go To Top

WLL-RX1p-II

UNCOMPRESSED STEREO AUDIO WIRELESS RECEIVER

The WLL-RX1p wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. An additional 9 receivers (for a total of 10) may be ordered to accompany a single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 30 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Receiver output options include Push-On phoenix connectors or 1/4″ connections. The WLL-RX1P also includes stereo line output for connecting auxiliary audio components. A Local Audio source may also be used at the receiver via stereo mini which mutes the wireless signal when connected.

Large Product Image | Tech Sheet | Installation Guide

RF Bands 2.4 GHz, 5.2 GHz & 5.8 GHz
Operating Range (full power) 150 ft indoors / 210 ft line of sight
Operating Range (low power) 50 ft indoors / 70 ft line of sight
Audio Frequency Response 20 Hz – 20 kHz
Amplifier Output Power 50w/ch @ 8 ohms 65w/ch@ 4ohms
Modulation Digital
Dynamic Range 90dB
Power Supply/Requirements 32V, 3.75A
Height 1.75 in
Width 6.1875 in
Depth 6.5 in
Weight 1.85 lbs
Housing Material Powder coated metal
ROHS Approved
Regulatory – CE CE UL FCC CCC ec
Optional Accessory AC-WLL-RMA rack mount adaptor