Dante-Enabled IP

NEW IPD-RS MODELS COMING IN Q4!

+ Software .EXE/Zip Download

DanteTM-enabled digital audio systems can now extend all the way to the end point in an installation. SoundTube’s IPD Speaker Series brings the convenience of Dante control and management to in-ceiling and surface-mount speakers. With a single category cable, you can run audio and up to 40 watts per channel PoE to a speaker. Every digital low latency speaker in a SoundTube IPD system is individually addressable and self-monitoring. And, because these speakers are set up and managed via software, zoning is easy and there’s no need to re-wire anything if system requirements change. We offer four in-ceiling IPD models and one surface-mount model. In addition, our IPD4 speakers give you an economical way to expand audio coverage in a Dante system. With an IPD4 speaker, up to three additional non-Dante SoundTube speakers may be added, and powered, to run off of a single Dante-enabled speaker. See below for more information.

All Dante systems will need specific software to route signal paths. Audinate’s Dante Controller can be used for this and can be downloaded here.
Dante Controller Software

STNet-Switch

STNet-Switch
Rack mountable 16-port 40w PoE switch. In addition to the 16 Ethernet ports, the STNet-Switch includes two gigabit ports to connect control DSPs and CobraNet® enabled input devices and is also used for linking additional switches. Also, a WAN port is provided for integration with an outside network. UL 60950 approved....

IPD-CM52-BGM

IPD-CM52-BGM
Dante®-addressable coaxial in-ceiling speaker incorporating one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are...

IPD-CM52s-BGM

5.25″ COAXIAL IN-CEILING BACKGROUND MUSIC SHALLOW BACKCAN SPEAKER
Dante®-addressable coaxial in-ceiling speaker engineered for installation in locations with small plenum space. A 3.5 inch-deep backcan incorporates one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V...

IPD-CM62-BGM

6.5″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER
Dante®-addressable coaxial in-ceiling speaker incorporating one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are...

IPD-CM82-BGM

8.0″ COAXIAL IN-CEILING BACKGROUND MUSIC SPEAKER
Dante®-addressable coaxial in-ceiling speaker incorporating one 8.0 inch (203 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 55 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are...

IPD-SM500i-II

5.25” COAXIAL SURFACE MOUNT SPEAKER
Dante®-addressable surface-mount speaker incorporating one 5.25-inch polypropylene woofer (134 mm) and one 1.0-inch (25.4 mm) convex titanium tweeter with BroadBeam® waveguide in an injection-molded, glass fiber reinforced ABS enclosure. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Mounting hardware for the IPD-SM500i-II is included and features SoundTube’s proprietary Stealth™ bracket mounting system, providing...

IPD4-CM52-BGM

5.25″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM
Offering an economical option for expansion of audio coverage in a digital speaker system, this DanteTM-addressable coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM52-BGM speakers. The speaker incorporates one 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 65 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on...

IPD4-CM62-BGM

6.5″ IP4-ADDRESSABLE 4 SPEAKER CAT 5 OR 6 SYSTEM
Offering an economical option for expansion of audio coverage in a digital speaker system, this DanteTM-addressable coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter.  BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on...

Coming Soon! IPD-HP82-EZ

8″ Open-Ceiling Speaker
Dante®-addressable coaxial pendant speaker incorporates one 8.0 inch (203 mm) high power coaxial driver with BroadBeamHP™ compression driver technology for long throw and smooth directivity. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung...

Coming Soon! IPD-RS82-EZ

8″ Open-Ceiling Speaker
Dante®-addressable coaxial pendant speaker incorporates ne 203 mm (8.0 in.) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via...

Coming Soon! IPD-RS62-EZ

6.5″ Open-Ceiling Speaker
Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via...