CM500i

CM500i

Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage. One 5.25 inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. Rapid-installation, blind-mount, fixed- wing mounting mechanism with constant-tension design affixing to ceiling thicknesses ranging from 0.25 inch (6.4 mm) to 1.91 inch (48.5 mm). Easy-access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position. Separate tool-free magnetic grille and bezel assembly with integrated safety cable for ease of install and in-field painting. Steel grille with protective powder-coated finish for lasting durability. Average sensitivity of 86.5 dB offers high-output capabilities and reduced amplification costs. UL 1480 (UEAY) and 2043 approved. Included accessories: Tile bridge, conduit plate, Euroblock connector and paint mask.

Specifications: CM500iMounting hardware included
Nominal Impedance8 ohm
Impedance (min)4.7 ohm
Sensitivity dB @ 2.83V/1M86.5dB
Sensitivity dB @ 1W/1M (2)86.5dB
Frequency Response (± 3 dB)75 Hz - 22 kHz
Frequency Response (±10 dB)55 Hz - 22 kHz
Max. Program Power150W
Max. Continuous Power RMS75W
Max. Power SPL @ 1 M105.5dB
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)4.8 (Average from 100 Hz - 10 kHz) 9.5 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)6.1dB (Average from 100 Hz - 10 kHz) 9.8dB (2 kHz)
Tap Selector6 Position rotary switch with transformer bypass
70.7 Volt Transformer Taps33w / 101.5dB
100 Volt Transformer Taps (dB)33w / 101.5dB
25 Volt Transformer Taps (dB)5w / 93.5dB
Transformer Options25 / 70.7 / 100 Volt 8 Ohm direct
Transducer - Low Frequency Driver5.25" Polypropylene Cone w/ Butyl Rubber Surround
Transducer - High Frequency Driver1" Convex Titanium Tweeter w/ Waveguide
Network Type: Low Pass12dB per octave, 2nd order
Network Type: High Pass12dB per octave, 2nd order
Angle95
Coverage Angle (-6 dB @ 2 kHz)95
ColorsBlack or white
Inputs4 Pin, 5.08 mm Euroblock for individual or daisy chain connection
Backcan Diameter219.2 mm / 8.6 in
Backcan Height196.9 mm / 7.75 in
Visible Diameter272 mm / 10.7 in
Visible Height24.4 mm / 0.96 in
Mounting Hole Diameter228.6 mm / 9.0 in
Weight3.4 kg / 7.5 lb
Shipping Weight10.7 kg / 23.6 lb
Accessories OptionalAC-CM5-PCB, Junction Box (AC-CMi-JBOX)
Packaging2 per box
Regulatory - ULApproved UL1480A & UL2043
Regulatory - CEApproved
Regulatory - RoHSapproved
Regulatory - IPnot planned