CM600i

CM600i

Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage. One 6.5 inch polypropylene woofer and one 1.0 inch convex aluminum tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum motor-board and heat sink. Rapid-installation, blind-mount, fixed-wing mounting mechanism with constant-tension design affixing to ceiling thicknesses ranging from 0.25 inch (6.4 mm) to 1.69 inch (42.9 mm). Easy-access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with a transformer bypass position. Separate tool-free magnetic grille and bezel assembly with integrated safety cable for ease of install and in-field painting. Steel grille with protective powder-coated finish for lasting durability. Average sensitivity of 88 dB offers high-output capabilities and reduced amplification costs. UL 1480 (UEAY) and 2043 approved. Included accessories: Tile bridge, Euroblock connector, paint mask, conduit plate.

Specifications: CM600iMounting hardware included
Nominal Impedance8 ohm
Impedance (min)5.3 ohm
Sensitivity dB @ 2.83V/1M88.0dB
Sensitivity dB @ 1W/1M (2)88.0dB
Frequency Response (± 3 dB)69 Hz - 22 kHz
Frequency Response (±10 dB)52 Hz - 22 kHz
Max. Program Power180W
Max. Continuous Power RMS90W
Max. Power SPL @ 1 M107.5dB
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)4 (Average 100 Hz - 10 kHz) 5.4 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.6dB (Average 100 Hz - 10 kHz) 7.3dB (2 kHz)
Tap Selector6 Position rotary switch with transformer bypass
70.7 Volt Transformer Taps33w / 103.0dB
100 Volt Transformer Taps (dB)33w / 103.0dB
25 Volt Transformer Taps (dB)5w / 95.0dB
Transformer Options25 / 70.7 / 100 Volt 8 Ohm direct
Transducer - Low Frequency Driver6.5" Polypropylene Cone with Butyl Rubber Surround
Transducer - High Frequency Driver1" Convex Titanium Tweeter w/ Waveguide
Network Type: Low Pass12dB per octave, 2nd order
Network Type: High Pass12dB per octave, 2nd order
Angle135
Coverage Angle (-6 dB @ 2 kHz)135
ColorsBlack or white
Inputs4 Pin, 5.08 mm Euroblock for individual or daisy chain connection
Backcan Diameter296.7 mm / 11.7 in
Backcan Height201.7 mm / 7.9 in
Visible Diameter374.9 mm / 14.8 in
Visible Height27.4 mm / 1.1 in
Mounting Hole Diameter323.9 mm / 12.8 in
Weight4.6 kg / 10.1 lb
Shipping Weight15.5 kg / 34.2 lb
Accessories OptionalPre-Construction Bracket (AC-CM8-PCB), Junction Box (AC-CMi-JBOX), Low-Profile Flangeless Grille (GRL-6/8-FLG-BK/WH)
Packaging2 per box
Regulatory - ULApproved UL1480A & UL2043
Regulatory - CEApproved
Regulatory - IPnot planned