SD1sm – Wood Applications

SD1sm – Wood Applications

Attaches to wood and similar surfaces using included wood screws. Each SD1sm is designed for one channel of audio. An optional equalization module (listed below) optimizes the SD1sm for use on wood surfaces.

Specifications: SD1sm – Wood ApplicationsMounting hardware included
Nominal Impedance8 ohms
Impedance (min)8 ohm
Sensitivity dB @ 2.83V/1M70 - 75 dB
Sensitivity dB @ 1W/1M (2)73.5 dB
Frequency Response (± 3 dB)80 Hz – 10 kHz Nominal w/o EQ
Frequency Response (±10 dB)60 – 15 kHz Nominal w/o EQ
Max. Program Power100W , with 100 Hz 12 dB octave high-pass
Max. Continuous Power RMS30W
Max. Power SPL @ 1 M88.5 dB
ColorsTitanium
InputsPlenum rated wire leads with screw connector block
Height (SM = Height)52.34 mm / 2.06"
Diameter (SM = Width)58.60 mm / 2.30"
Weight0.47 kg / 1.05 lbs
Shipping Weight0.64 kg / 1.4 lbs
Accessories OptionalHeat Sink Fins, Passive Equalization Modules
Packaging1 per box
Regulatory - ULapproved_1480_2043
Regulatory - CEapproved
Regulatory - RoHSapproved