WLL-RX1p-II

WLL-RX1p wireless receiver

The WLL-RX1p wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. An additional 9 receivers (for a total of 10) may be ordered to accompany a single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 30 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Receiver output options include Push-On phoenix connectors or 1/4″ connections. The WLL-RX1P also includes stereo line output for connecting auxiliary audio components. A Local Audio source may also be used at the receiver via stereo mini which mutes the wireless signal when connected.

Specifications: WLL-RX1p-IIMounting hardware included
System Type

wireless receiver

Power Requirements32V, 3.75A
RF Band2.4 GHz
Operating Range (full power)150 ft indoors / 210 ft line of sight
Operating Range (low power)50 ft indoors / 70 ft line of sight
Audio Frequency Response20 Hz – 20 kHz
Amplifier Output Power50w/ch @ 8 ohms 65w/ch@ 4ohms
ModulationDigital
Dynamic Range90dB
Height (SM = Height)44.45 mm / 1.75 in
Diameter (SM = Width)157.16 mm / 6.18 in
SM Depth (Including Bracket)165.1 mm / 6.5 in
Weight0.83 Kg / 1.85 lbs