WLL-TX1

WLL-TX1 wireless transmitter

The WLL-TX1 wireless transmitter unit transmits uncompressed stereo audio wirelessly for maximum fidelity. An additional 9 receivers (for a total of 10) may be ordered to accompany the included single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 30 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Audio input options for the transmitter unit include USB, stereo mini or 1/4″ balanced input connections at the transmitter. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. A High/Low power selector switch on transmitter limits RF range where needed.

Specifications: WLL-TX1Mounting hardware included
System Type

wireless transmitter

Power Requirements32V, 3.75A
RF Band2.4 GHz
Operating Range (full power)150 ft indoors / 210 ft line of sight
Operating Range (low power)50 ft indoors / 70 ft line of sight
Audio Frequency Response20 Hz – 20 kHz
Amplifier Output Power50w/ch @ 8 ohms 65w/ch@ 4ohms
ModulationDigital
Dynamic Range90dB
Height (SM = Height)44.45 mm / 1.75 in
Diameter (SM = Width)157.16 mm / 6.18 in
SM Depth (Including Bracket)165.1 / 6.5 in
Weight0.83 Kg / 1.85 lbs
Accessories OptionalRack-Mount Adapter (AC-WLL-RMA)
Regulatory - CECE UL FCC CCC ec
Regulatory - RoHSapproved