WLL-TR-1p-II

Complete uncompressed wireless transmitter and receiver system

The WLL-TX1 wireless transmitter unit transmits uncompressed stereo audio wirelessly for maximum fidelity. An additional 9 receivers (for a total of 10) may be ordered to accompany the included single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 30 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. Audio input options for the transmitter unit include USB, stereo mini or 1/4″ balanced input connections at the transmitter. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms. A High/Low power selector switch on transmitter limits RF range where needed.

Specifications: WLL-TR-1p-IIMounting hardware included
Power Supply32V, 3.75A
RF Band2.4 GHz, 5.2 GHz & 5.8 GHz
Operating Range (full power)150 ft indoors / 210 ft line of sight
Operating Range (low power)50 ft indoors / 70 ft line of sight
Audio Frequency Response20 Hz – 20 kHz
Amplifier Output Power50w/ch @ 8 ohms 65w/ch@ 4ohms
Amp Power50w/ch @ 8 ohms 65w/ch@ 4ohms
ModulationDigital
Dynamic Range90dB
Height (SM = Height)1.75 in
Diameter (SM = Width)6.18 in
Depth6.5 in
Weight1.85 lbs
Accessories OptionalAC-WLL-RMA rack mount adaptor
Regulatory - CEapproved
Regulatory - RoHSapproved