The next generation version of the CM82-EZ with improved and additional features. One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. Easy-access six-position tap switch for 25/70.7/100-volt and 16-ohm transformer bypass settings allows for easy ordering, stocking and installation. Reduced amplification costs and maximum efficiency 89.0 dB sensitivity, 16 ohm impedance and a sealed enclosure. Superior voice intelligibility with an average coverage angle of 95° (2–10 kHz, independently verified). Cost-effective 16 ohm settings allows for the use of multiples of two, four, or six speakers in a system using a standard amplifier without a transformer. Incorporates a painted steel grille with rust inhibitor for lasting durability. Ceramic input terminal accepts up to 10 gauge plenum rated signal wire and includes thermal fuse. Suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. Adaptable to ceiling thicknesses ranging from 0.04 inch (0.9 mm) to 1.60 inch (40.6 mm). UL 1480 (UEAY) and 2043, cUL, CE (EMC Directive 89/366/EEC, EN55020, EN55013) approved. Included accessories: tile bridge, UL-listed 0.5-inch conduit clamp, paint shield and two wire nuts.

Specifications: CM82-EZ-IIMounting hardware included
Nominal Impedance16 ohm
Impedance (min)17.2 ohm
Sensitivity dB @ 2.83V/1M86.0dB
Sensitivity dB @ 1W/1M (2)89.0dB
Frequency Response (± 3 dB)92 Hz - 18 kHz
Frequency Response (±10 dB)65 Hz - 22 kHz
Max. Program Power128W
Max. Continuous Power RMS64W
Max. Power SPL @ 1 M107.0dB
Max. SPL @ 3dB distortion20W
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)5.4 (Average 100 Hz - 10 kHz) 7.2 (2 kHz)
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.5dB (Average 100 Hz - 10 kHz) 8.6 dB (2 kHz)
Tap Selector6 Position rotary switch with transformer bypass
70.7 Volt Transformer Taps64w / 107.0dB
100 Volt Transformer Taps (dB)64w / 107.0dB
25 Volt Transformer Taps (dB)8w / 98.0dB
Transformer Options25 / 70.7 / 100 Volt 16 Ohm direct
Transducer - Low Frequency Driver8" Polypropylene Cone w/ Butyl Rubber Surround
Transducer - High Frequency Driver1″ Silk Dome
Network Type: Low Pass6dB per octave, 1st order
Network Type: High Pass6dB per octave, 1st order
Coverage Angle (-6 dB @ 2 kHz)105
ColorsBlack / White / Custom
Connections4 position ceramic terminal strip
Inputs4 position ceramic terminal connector
Backcan Diameter245.6 mm / 9.67 in
Backcan Height146.1 mm / 5.75 in
Visible Diameter298.5 mm / 11.75 in
Visible Height8.6 mm / 0.34 in
Mounting Hole Diameter266.7 mm / 10.5 in
Weight4.1 kg / 9 lbs
Shipping Weight4.5 kg / 10 lbs
Accessories IncludedUL-Listed Flex Conduit Clamp, Paint Shield, Wire Nuts, Paint Mask, Tile Bridge
Packaging1 per box
Regulatory - ULApproved UL1480A & UL2043
Regulatory - CEApproved
Regulatory - RoHSapproved
Regulatory - IPnot planned