CM62-BGM-BK

CM62-BGM-BK
Find a Reseller
Out of stock

This item has been discontinued and replaced with the CM62-BGM-II-BK.

SoundTube 6.5" In Ceiling Speaker in Black

SoundTube CM62-BGM In Ceiling Speaker in Black

One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 64 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 85.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480, UL 2043 and EN54-24 listed. IP-Rating: IPX3.

Included accessories: Choose between a tile bridge or a pre-construction bracket, UL listed 0.5 inch conduit clamp, paint shield.

Owner's Manual | Tech Sheet | Mechanical Drawing | A&E Specs | GLL | EN54 Certification | UL Certificate

About SoundTube
More Information
ColorBlack
UPC752830440784
ManufacturerSoundTube
Manufacturer's CategoryCM-BGM Background Music In-Ceiling
Shipping Weight10.4 lbs / 4.72 kg
Carton Height8 in / 203.2 mm
Carton Length13.25 in / 336.55 mm
Carton Width13.25 in / 336.55 mm
CertificationsCE, EN54, RoHS, UL1480, UL2043
Enclosure PropertiesABS Glass Fiber Reinforced, Injection Molded, Ported
Enclosure Volume350 cu in / 5735.47 cu cm
Included AccessoriesConduit Clamp, Cover Plate, Grille, Paint Mask, Choose Between a Tile Bridge or Pre-Construction Bracket
Optional AccessoriesBlack Grille (GRL-CM6/8EZ-II-BK)|Tile Bridge (AC-CMEZ6/8-TB)|Pre-Construction Bracket (AC-CMEZ6/8-PCB)|Junction Box (AC-CM-EZ-JBOX)
Source Inputs4 Pin Ceramic Terminal
IP RatingIPX3
Backcan Diameter9.67 in / 245.6 mm
Backcan Height5.75 in / 146.1 mm
Coverage Angle (±6dB @ 2kHz) 100°
Crossover Frequency4.0 kHz
Cutout Width/Diameter10.5 in / 266.7 mm
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)5.9 and 8.0
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)4.9dB and 6.3dB
Frequency Response (± 10 dB)50 Hz - 22 kHz
Frequency Response (± 3 dB)54 Hz - 20 kHz
Grille PropertiesBlack, Standard-Flange, Friction-Fit, Paintable, Painted, Steel
Low Frequency Voice Coil1 in / 25.4 mm
Low Pass Crossover12 dB per octave 2nd order
Max. Ceiling Thickness1.6 in / 40.6 mm
Max. Continuous Power RMS50W
Max. Program Power100 W
Minimum Impedance (Ω Ohms)16 Ω
Minimum Ceiling Thickness0.04 in / 0.9 mm
Network Type: High Pass6 dB per octave 1st order
Nominal Impedance (Ω Ohms)16 Ω
Tweeter Driver1" Silk Dome w/ BroadBeam Ring®
Woofer Driver6.5" Polypropylene Cone w/ Butyl Rubber Surround
Sensitivity dB @ 1W/1M84.5 dB
Sensitivity dB @ 2.83V/1M81.4 dB
Tap SelectorRotary Switch
Transformer Taps Max. Setting (25V/70.7V/100V)4W/32W/32W
Visible Diameter11.75 in / 298.5 mm
Visible Height0.34 in / 8.6 mm
Copyright © MS Electronics. All rights reserved.