ID1.W-BG - Single Speaker
Induction Dynamics ID1 Wall-Mount Tower Speaker
Note: Minimum lead time of 3 weeks on all Induction Dynamics products. Contact Customer Service if you would like more information.
Speakers sold individually. Purchase two for complete stereo system.
The on-wall version of the ID1, the ID1.W combines dual 10 inch subwoofers with a 3-way loudspeaker. A home theater processor may be used to provide the subwoofer crossover and to operate the ID1.W as part of a surround system or as a two-channel stereo system. The ID1.W features wooden cabinetry in standard or custom finishes. Face plate is removable so the aluminum back plate can mount directly to wall. S4X® circuitry compensates for on-wall baffle effects.
The ultimate in audio perfection, the ID1 series includes 3-way and 4-way speakers in tower, in-wall, and on-wall designs. Built to function as left and right mains, theses speakers pump rich sound from deep bass to crystal clear highs.About Induction Dynamics
|Manufacturer's Category||ID1 Series|
|Depth||4 in / 101.6 mm|
|Height||55.5 in / 1409.7 mm|
|Width/Diameter||14.5 in / 368.3 mm|
|Enclosure Properties||Dual Chamber, Ported, Sealed|
|Optional Accessories||A2 Amplifier|
|Source Inputs||Nickel Plated Binding Posts|
|Crossover Frequency||Upper: 700 Hz; 3.8 kHz - Active Only | Lower: 70 - 80 Hz Recommended|
|Frequency Response (± 3 dB)||Upper: 55-22 kHz | Lower: 27-150 Hz|
|Grille Properties||Cloth, Snap-Fit|
|Nominal Impedance (Ω Ohms)||Upper: 8 Ω | Lower: 4 Ω|
|Tweeter Driver||1.125" Inverted Titanium Dome|
|Midrange Driver||3" Soft Dome|
|Woofer Driver||6.5" Kevlar Cone With Rubber Surround & Cast Frame|
|Subwoofer Driver||10" Mica-Graphite Poly Cone with Rubber Surrounds and Cast Frames|
|Power Handling||150 W, 500 W|
|Sensitivity dB @ 2.83V/1M||Upper: 90 dB | Lower: 80 dB|