In stock
SoundTube 8" High Power, IP-Addressable, Dante-Enabled, Speaker in Black

SoundTube IPD-HP82-EZ IP-Addressable Speaker in Black

Dante®-enabled coaxial pendant speaker incorporates one 8.0 inch (203 mm) high power coaxial driver with BroadBeamHP compression driver technology for long throw and smooth directivity. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. The speaker may also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications. Aluminum grille with protective powder coated finish. Hanging hardware, weather plug, cover plate, and AC-RSEZ-HH-10 are included.

Owner's Manual | Tech Sheet | Applications Guide

About SoundTube
More Information
Manufacturer's CategorySTNet IP-Addressable and Dante Series
Height12.9 in / 327.7 mm
Width/Diameter12.83 in / 325.9 mm
Shipping Weight14.8 lbs / 6.71 kg
Carton Height16 in / 406.4 mm
Carton Length15 in / 381 mm
Carton Width15 in / 381 mm
CertificationsCE, RoHS, UL60065
Enclosure PropertiesReinforced ABS
Included AccessoriesAdapter, Cover Plate, Hanging Hardware, Weather Plug, Wire Gland
Optional AccessoriesBlack Grille (GRL-RS82-EZ-BK)|10' Hanging Cable (AC-RSEZ-HH-10)|20' Hanging Cable (AC-RSEZ-HH-20)|Black Weatherboot (WEATHERBOOT-L-BK)|Beam Clamp (AC-BC1)|Forged Eye Bolt (AC-FE1)|Black Split Loom Tubing (AC-SLT-10-BK)|Snap Link (AC-SL1)
Crossover Frequency2.5 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)5.0 and 3.7
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.6 dB and 5.7 dB
Frequency Response (± 10 dB)80 Hz - 22 kHz
Frequency Response (± 3 dB)110 Hz - 22 kHz
Grille PropertiesAluminum, Powder-Coated
Low Frequency Voice Coil1.5 in / 38.1 mm
Low Pass Crossover6 dB per octave 1st order
Magnetically BoostedNo
Max. Continuous Power RMS64 W
Max. Program Power128 W
Network Type: High Pass6 dB per octave 1st order
Tweeter Driver1.38" Titanium Compression Driver w/ Waveguide
Woofer Driver8" Treated paper cone Cloth surround
Sensitivity dB @ 1W/1M92 dB
Sensitivity dB @ 2.83V/1M89 dB
Tap SelectorRotary Switch
Write Your Own Review
You're reviewing:IPD-HP82-EZ-BK

Related Products

Check items to add to the cart or
Copyright © MS Electronics. All rights reserved.