IPD-TSB2.0 STNet Dante-Enabled Soundbar

IPD-TSB2.0
Find a Reseller
In stock
AVAILABLE NOW!!

SoundTube STNet® Ultra-Thin 2-way Dante-Enabled Soundbar. For conference rooms, classrooms, and offices, as part of an IP-based system.

SoundTube IPD-TSB2.0 Dante-Enabled Soundbar

An ultra-thin 2-way Dante-enabled digital end-point solution in a soundbar configuration. Measuring only 1.5 inches thick where the bar meets the TV, the soundbar incorporates a right and left speaker with four 3-inch polypropylene woofers with NBR surrounds, four bass radiators, and two 0.75-inch synthetic soft dome tweeters. Wall and table-top mounting hardware are included.

The IPD-TSB2.0 Soundbar brings Dante connectivity from end-to-end in conferencing and boardroom video installations. Making the soundbar interoperable with other Dante products gives integrators additional flexibility when designing and installing audio systems. Built with high-quality materials and stylish brushed metal cosmetics, the IPD-TSB2.0 Soundbar is a reliable, unrivaled solution for any audio/video system.

The Dante Soundbar is made of extruded aluminum and has an integrated metal grill which is designed to integrate seamlessly underneath 55-inch and larger monitors. With digital signals plus PoE power sent directly to the speakers via standard category cable, SoundTube’s STNet Soundbar is simple to connect. The intelligent amplifier with DSP monitors the functions of the speaker and can send an alert if there are any problems with the SoundBar. Each IPD-TSB2.0 is configurable using SoundTube STNet Control Center software. The software is used to setup the SoundBar via an 8 band parametric EQ, delay and input and output gain using a built in pink noise generator. And, because they are on the Dante platform, they are interoperable with a host of other products worldwide. They may be used with SoundTube’s STNet Switch, offering up to 40 watts PoE to each speaker, or with standard PoE or PoE+ switches.

Note: SoundTube IPD speakers are NOT compatible with PoE++. 30W PoE maximum (or 40W maximum with STNet Switch II)

Owner's Manual |  Tech Sheet |  Wall Bracket Line Drawing |  Table Top Stand Line Drawing |  3D DWG |  Cutsheet |  STNet Control Center Software User Manual |  STNet/Dante Firmware Download

About SoundTube
More Information
ColorBlack
UPC644216232208
ManufacturerSoundTube
Manufacturer's CategorySTNet IP-Addressable and Dante Series
Depth2.5 in / 63.5 mm - (1.5 in where the Soundbar meets the TV)
Height6.75 in / 171.45 mm
Width/Diameter43 in 1092.2 mm
Shipping Weight17.6 lbs / 7.98 kg
Carton Height6.75 in / 171.5 mm
Carton Length45 in / 1143 mm
Carton Width5.75 in / 146.05 mm
CertificationsCE, RoHS, cTUVus, CSA C22.2 No 62368-1 / UL 62368-1 2nd ED
Enclosure PropertiesAluminum
Included AccessoriesGrille, Mounting Hardware, Stand/Base
Source InputsRJ45 Ethernet Port
TAA Compliant (Trade America)No
BAA Compliant (Made in USA)No
Recommended PowerPoE, PoE+, 40W PoE, 24V Barrel Connector
Coverage Angle (±6dB @ 2kHz) 45° Horizontal / 120° Vertical
Crossover Frequency3.5 kHz
Frequency Response (± 10 dB)65 Hz - 20 kHz
Frequency Response (± 3 dB)85 Hz - 20 kHz
Grille PropertiesAluminum, Friction-Fit, Powder-Coated
Max SPL @ 1M100 dB
Network Type: High Pass12dB per octave, 2nd order
Tweeter Driver(2) .75" Silk Soft Dome
Woofer Driver(4) 3" Polypropylene Cones, (4) 3" Bass Radiators w/NBR Surround
Copyright © MS Electronics. All rights reserved.