RS600i-WH

RS600i-WH
Find a Reseller
In stock
SoundTube 6.5" Hanging Speaker in White with a BroadBeam® Tweeter

SoundTube RS600I Hanging Speaker in White

The RS600i has a 6.5-inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. The two-way ported speaker with an open-ceiling enclosure design delivers effective low-end response (58 Hz) and 100° off-axis performance (2 to 10 kHz, indepen-dently verified). The RS600i uses patented ZeroReflection enclosure technology for optimal sound reproduction and cabinet rigidity. SoundTube®'s proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The RS600i speaker design incorporates a low-profile grille, proprietary motor-board and a six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass positions. Hanging hardware is included and features a SpeedClamp self-locking cable grip for fast, easy and secure installation. Euroblock connector and terminal weather boot are included.

Owner's Manual |  Tech Sheet |  Mechanical Drawing |  A&E Specs |  GLL |  EASE 4.0 |  EASE 3.0 |  CLF 1 |  CLF 2 |  Revit |  DXF |  DWG |  PDF Drawing |  Tap Switch Instructions |  UL Certificate

About SoundTube
More Information
ColorWhite
UPC752830443488
ManufacturerSoundTube
Manufacturer's CategoryRSi Original Pendant
Height14.31 in / 363.5 mm
Width/Diameter12.1 in / 307.3 mm
Shipping Weight17.7 lbs / 8.02 kg
Carton Height16.5 in / 419.1 mm
Carton Length15 in / 381 mm
Carton Width15 in / 381 mm
CertificationsCE, MIL Spec, RoHS, UL1480A, UL2239
Enclosure PropertiesABS Glass Fiber Reinforced, Injection Molded, Ported
Enclosure Volume686.7 cu in / 11253 cu cm
Included AccessoriesEuroblock, Hanging Hardware, Safety Cable, Terminal Weather Boot
Optional AccessoriesWhite Grille (GRL-RS600-WH)|10' Hanging Cable (AC-RS-HH-10)|20' Hanging Cable (AC-RS-HH-20)|50' Hanging Cable (AC-RS-HH-50)|White Mounting Bracket (AC-RS-SM6-WH)|Connector (EUROBLOCK)|White Weatherboot (WEATHERBOOT-L-WH)|Beam Clamp (AC-BC1)|Forged Eye Bolt (AC-FE1)|White Split Loom Tubing (AC-SLT-10-WH)|Snap Link (AC-SL1)
Source Inputs4 Pin 5.08mm Euroblock
TAA Compliant (Trade America)No
BAA Compliant (Made in USA)No
Coverage Angle (±6dB @ 2kHz) 100°
Crossover Frequency3.0 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)4.7 and 7.9
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)5.7dB and 9.0dB
Frequency Response (± 10 dB)58 Hz - 22 kHz
Frequency Response (± 3 dB)85 Hz - 17 kHz
Grille PropertiesPowder-Coated, Steel
Low Frequency Voice Coil1 in / 25.4 mm
Low Pass Crossover12 dB per octave 2nd order
Max. Continuous Power RMS90W
Max. Program Power180 W
Minimum Impedance (Ω Ohms)4.8 Ω
Network Type: High Pass12 dB per octave 2nd order
Nominal Impedance (Ω Ohms)8 Ω
Tweeter Driver1" Convex Aluminum w/ BroadBeam® Waveguide
Woofer Driver6.5" Polypropylene Cone w/ Butyl Rubber Surround
Sensitivity dB @ 1W/1M88.5 dB
Sensitivity dB @ 2.83V/1M88.5 dB
Tap SelectorRotary Switch
Transformer Options25 / 70.7 / 100 V, 8 Ohm direct
Transformer Taps Max. Setting (25V/70.7V/100V)5W/33W/33W
Copyright © MS Electronics. All rights reserved.