Titanium SolidDrive for Drywall

SD-1
Find a Reseller
In stock

SolidDrive SD-1 Drywall Surface Mount Actuator in Titanium

SolidDrive SD-1 Surface Mount Actuator in Titanium

The SD-1 attaches to drywall and similar surfaces using our patented cantilever spring mounting bracket. Each SD-1 is designed for one channel of audio. An optional equalization module optimizes the SD-1 for use on drywall. The SolidDrive utilizes patent-pending dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate with very high-powered neodymium magnets and dual symmetrically opposed motors to convert audio signals into powerful vibrations. Those vibrations are transferred into solid surfaces through direct contact. High-quality, full-range sound is then radiated from the entire surface with a frequency response of 60 Hz to 15 kHz. The symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics. The result is acoustical uniformity throughout the listening space.

Additional optional accessories: SD1-BR16, SD1-BR16-R

Owners Manual | Tech Sheet | Mechanical Drawing 1 | Mechanical Drawing 2 | CE Certification | UL Certificate

About SolidDrive

DRYWALL

SD-1

Machine screws inserted into holes countersunk from bottom, to attach transducer to drywall sprin-bracket (sold separately).

Drywall brackets come in 3 sizes:

GLASS

SD-1G

Installation via VHB Adhesive Disc (included) on smaller foot/base.

WOOD

SD-1SM

Wood screws inserted into holes countersunk from top, to attach transducer directly to mounting surface.

More Information
ColorTitanium
UPC644216215003
ManufacturerSolidDrive
Manufacturer's CategoryThe Original SolidDrive
Height2.06 in / 52.32 mm
Width/Diameter2.3 in / 58.42 mm
Shipping Weight1.4 lbs / 0.635 kg
Carton Height5.5 in / 139.7 mm
Carton Length5.25 in / 133.35 mm
Carton Width5.25 in / 133.35 mm
CertificationsCE, RoHS, UL1480A, UL2043
Enclosure PropertiesAnodized Aluminum
Optional AccessoriesTitanium Heat Sink (SD1-HS-TI)|12" On-Center Bracket Assembly (SD1-BR12) |16" On-Center Rear-Install Drywall Bracket assembly for SolidDrive (SD1-BR16-R)|16" On-Center Bracket Assembly (SD1-BR16)|24" On-Center Bracket Assembly (SD1-BR24)|Passive Equalization Module - Drywall (PEM-DW)|Junction Box (AC-JB10-XFMR or AC-JB20-XFMR)
Source InputsWire Leads
TAA Compliant (Trade America)Yes
BAA Compliant (Made in USA)Yes
Frequency Response (± 10 dB)60 Hz - 15 kHz Nominal w/o EQ
Frequency Response (± 3 dB)80 Hz - 10 kHz Nominal w/o EQ
Max. Continuous Power RMS30 W
Max. Program Power100 W
Minimum Impedance (Ω Ohms)8 Ω
Nominal Impedance (Ω Ohms)8 Ω
Sensitivity dB @ 1W/1M73.5 dB
Sensitivity dB @ 2.83V/1M70 - 75 dB
Copyright © MS Electronics. All rights reserved.