MSE Audio
Induction Dynamics
Phase Technology
Rockustics
SolidDrive
Soundsphere
SoundTube
Darts
TheaterSound
August 10, 2024
Titanium SolidDrive for Wood
SD-1SM
In stock
SolidDrive SD-1 Wood Surface Mount Actuator in Titanium
SolidDrive SD-1 Surface Mount Actuator in Titanium for Wood Surfaces
The SD1sm attatches to wood and similar surfaces using included wood screws. Each SD1sm is designed for one channel of audio. An optional equilization module optimizes the SD1sm for use on wood surfaces. The SolidDrive utilizes patent-pending dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate with very high-powered neodymium magnets and dual symmetrically opposed motors to convert audio signals into powerful vibrations. Those vibrations are transferred into solid surfaces through direct contact. High-quality, full-range sound is then radiated from the entire surface with a frequency response of 60 Hz to 15 kHz. The symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics. The result is acoustical uniformity throughout the listening space.
Owners Manual | Tech Sheet | Mechanical Drawing 1 | Mechanical Drawing 2 | CE Certification | UL Certificate
About SolidDriveDRYWALL
SD-1
Machine screws inserted into holes countersunk from bottom, to attach transducer to drywall spring-bracket (sold separately).
Drywall brackets come in 3 sizes:
GLASS
SD-1G
Installation via VHB Adhesive Disc (included) on smaller foot/base.
WOOD
SD-1SM
Wood screws inserted into holes countersunk from top, to attach transducer directly to mounting surface.
| Color | Titanium |
|---|---|
| UPC | 644216214907 |
| Manufacturer | SolidDrive |
| Manufacturer's Category | The Original SolidDrive |
| Height | 2.06 in / 52.32 mm |
| Width/Diameter | 2.3 in / 58.42 mm |
| Shipping Weight | 1.45 lbs / 0.66 kg |
| Carton Height | 5.5 in / 139.7 mm |
| Carton Length | 5.25 in / 133.35 mm |
| Carton Width | 5.25 in / 133.35 mm |
| Certifications | CE, RoHS, UL1480A, UL2043 |
| Enclosure Properties | Anodized Aluminum |
| Optional Accessories | Titanium Heat Sink (SD1-HS-TI)|Passive Equalization Module - Wood/Surface Mount (PEM-W)|Junction Box (AC-JB10-XFMR or AC-JB20-XFMR) |
| Source Inputs | Wire Leads |
| TAA Compliant (Trade America) | Yes |
| BAA Compliant (Made in USA) | Yes |
| Coverage Angle (±6dB @ 2kHz) | 120° |
| Frequency Response (± 10 dB) | 60 Hz - 15 kHz Nominal w/o EQ |
| Frequency Response (± 3 dB) | 80 Hz - 10 kHz Nominal w/o EQ |
| Max. Continuous Power RMS | 30 W |
| Max. Program Power | 100 W w/ 100 Hz 12 dB octave high-pass |
| Minimum Impedance (Ω Ohms) | 8 Ω |
| Nominal Impedance (Ω Ohms) | 8 Ω |
| Sensitivity dB @ 1W/1M | 73.5 dB |
| Sensitivity dB @ 2.83V/1M | 70 - 75 dB |
