WLL-TR-1P-II Wireless Transmitter and Receiver
SoundTube WLL Tri-band Uncompressed Wireless Transmitter and Receiver System
The WLL-TX1 wireless transmitter unit transmits uncompressed stereo audio wirelessly for maximum fidelity. Audio input options for the transmitter unit include USB, stereo mini or 1/4" balanced input connections at the transmitter. A High/Low power selector switch on transmitter limits RF range where needed.
The WLL-RX1p wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. Receiver output options include Push-On phoenix connectors or 1/4" connections. The WLL-RX1P also includes stereo line output for connecting auxiliary audio components. A Local Audio source may also be used at the receiver via stereo mini which mutes the wireless signal when connected.
An additional 5 receivers (for a total of 6) may be ordered to accompany a single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 18 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms.
|Depth||6.5 in / 165.1 mm|
|Height||1.75 in / 44.45 mm|
|Width/Diameter||6.1875 in / 157.16 mm|
|Shipping Weight||4.8 lbs / 2.18 kg|
|Carton Height||6 in / 152.4 mm|
|Carton Length||12.5 in / 317.5 mm|
|Carton Width||9 in / 228.6 mm|
|Certifications||CCC, CE, RoHS, FCC|
|Included Accessories||Antenna, Power Supply, Rack Mount Adapters|
|Optional Accessories||Rack Mount Adaptor (AC-WLL-RMA)|Power Supply (AC-PS3240)|EU Power Supply (AC-PS3240-EU)|International Power Supply (AC-PS512-INTL)|
|Power Requirements||Transmitter: 5V 1.2A | Receiver: 32V 4.0A|
|Frequency Response (± 3 dB)||20 Hz - 20 kHz|